Working principle
1: Machine was composed of rotary drum and belt press dewatering. The processing flow is : sludge inlet, polymerdosing, mixing, reaction, thickening and dewatering under steady flow conditions to remove the water from sludge.
2: The sludge and flocculants are added to the conditioning tank together and after proper stirring and retention time will get a good gel plume is formed.
3:The sludge plume overflows into the drum by gravity, rotates and thickens through relative motion, increasing the speed of free water separation and sludge concentration to form a solid sludge mass.
4:The sludge falls into the gravity dewatering zone of the upper belt filter to get the second stage gravity dehydration. At the same time,the sludge equalizer is positioned and adjusted to force the sludge to be uniform in thickness and width.
5:The evenly divided sludge dropped to the gravity dehydration zone of the lower belt filter to get the third stage of gravity dehydration. At this time, the sludge solids concentration can reach over 8-10%.
6:The sludge begins to enter into the initial pressure wedge-shaped throat, initial pressure → low pressure → medium pressure → high pressure, and squeezes and dewaters in a horizontal wave-shaped motion track.
7:The sludge cake attached to the belt filter is derived, and peeled off by a scraper and dropped into the next stage processing unit.
8:Sludge cake solid content can reach to 15-22%.
Application fileds
In order to clean, transport or incinerate, the belt dewatering machine is mainly to treat sludge before thickening or thickened after reaction to sludge cake.
It was applied for municipal wastewater, chemical industry, textiles, printing and dyeing, papermaking, leather, pharmaceuticals,wine making, livestock farms and other industries.
Technical character
Belt press dewatering machine with high dehydration efficiency,large sludge treatment capacity, automatic continuous operation, low energy consumption, low noise, simple structure, semi-closed structure, and easy maintenance.
It is easy to operate, understand, and learn, and you can master the entire operation process in a short time.
Model
Spec. |
FTBH-1500 |
FTBH-2000 |
FTEH-1500 |
FTEH-2000 |
FTEH-2500 |
FTEH-3000 |
Remark |
| Belt Width(mm) |
1500 |
2000 |
1500 |
2000 |
2500 |
3000 |
|
Low Consistency |
Treating Capacity(m /h)
Inlet Consistency(S.S.0.6~1.5%) |
22~33 |
30~40 |
25~35 |
35~45 |
40~55 |
65~80 |
Depends on the slurry feature |
D.S.(kg/h)
Dried Sludge |
132~330 |
180~450 |
150~375 |
210~525 |
270~675 |
390~975 |
Depends on the slurry feature |
Water Conten's Rate(%) |
75~85 |
75~85 |
75~85 |
75~85 |
75~85 |
75~85 |
Depends on the slurry feature |
Power
Consumption (KW) |
Driving Motor(Speed Variable) |
0.75 |
1.1 |
1.1 |
1.5 |
3.0 |
4.0 |
|
Disposal Agitator Motor |
0.37×2 |
0.37×2 |
0.37×2 |
0.37×2 |
0.55×2 |
0.55×2 |
|
Drum Thickener |
0.37×2 |
0.37×2 |
0.37×2 |
0.37×2 |
0.55×2 |
0.55×2 |
|
Lower Collecting Tray for Pressed Filtrate |
None |
None |
None |
None |
None |
None |
|
External Dimensions (mm) |
L |
3060 |
3380 |
3310 |
3600 |
4060 |
4810 |
Please ask for the actual Dimension before ordering |
| W |
2060 |
2600 |
2110 |
2670 |
3340 |
3730 |
| H |
2490 |
2500 |
2540 |
2850 |
3250 |
3820 |
| Reference Weight(kg) |
2040 |
3040 |
2110 |
3400 |
5200 |
7470 |
|
Shanghai Fuchan Machinery Technology Co., Ltd. was established in 2007. The company is located in Pudong NewArea, Shanghai, close to the Shanghai Free Trade Zone. lt is a technology-based enterprise integrating technologytrade and mechanical processing. Since its establishment, it has been dedicated to the research and developmentproduction and sales of equipment in the environmental protection field, as well as the research and development,technical services and technology transfer in this field. The company has established cooperation with key domesticuniversities to form an integrated system covering research and development, production, sales and service
During its development, the company has continuously introduced and absorbed new foreign technologies, emphasizingtechnological innovation and service for the enterprise. Adhering to technology as the forerunner, research anddevelopment as the foundation, and service as the tenet, we provide customers with comprehensive equipment solutionswith advanced processing techniques, reliable product quality, and high-quality after-sales service.
The company has established a production base in Haian City, Jiangsu Province.
The main production and operation of the enterprise: Belt sludge thickening and dewatering integrated machine, screwpress sludge dewatering machine, flocculant preparation system, sludge thickener, high-pressure belt sludge deepdewatering machine, lime-stabilized semi-drying equipment, sludge drying equipment (batch type/belt dryer), chemicaldosing system, screw conveyor, lime silo, sludge silo, blower aeration system and other environmental protection
equipment.
We have a professional team in the environmental engineering and sludge treatment industry, capable of providing ouicustomers with systematic solutions ranging from initial technical consultation, scheme design, equipment selection toon-site construction. Whether you need individual equipment or systematic solutions, we will do our best to provide youwith the highest quality products and services, achieving a win-win situation for both your enterprise and your customers!The company's products have been widely applied and recognized in numerous municipal sewage treatment plants.water purification plants, chemical, food, mining, papermaking and other industries, and have successfully been exportedto Southeast Asia, Russia, South America and other countries. With an inclusive attitude, we sincerely welcome your visit.
Q: Are you trading company or manufacture?
A: We are both manufacture and trading company. We have over 10 years' professional experience as a waste water treatment equipment manufacturer and engineering service enterprise.
Q: Where is your factory located?
A: Haian City, Jiangsu Province City, which is very close to Shanghai with only less than 3 hours' driving.
Q: What kind of payment do you accept?
A: T/T, L/C
Q: Do you provide OEM service?
A: Yes.
Q: How could we trust you and your company? This is first time transaction?
A: Our company has more than 10 years professional experience. We cooperate over 1000 customers in China and overseas. Welcome to our company and watch our plant production condition any time.
Q: What certificates do you have?
A: CE/ISO
Q: Do you offer after-sales service?
A: Yes. Engineers available.
Q: How long is your warranty?
A: One year after the arrival of the goods.
Q: What about your delivery Time?
A: Normally within 45 days against down payment.
Audited Supplier 
){kind=link}